

Un-Ordered lists are basically bullet points. These tend to be the most commonly used lists. Take a look at these examples
| Type : Circle | Type : Disc * | Type : Square |
|
|
|
| the html code | ||
|
<ul type="circle"> <li>item 1</li> <li>item 2</li> <li>item 3</li> </ul> |
<ul type="disc"> <li>item 1</li> <li>item 2</li> <li>item 3</li> </ul> |
<ul type="square"> <li>item 1</li> <li>item 2</li> <li>item 3</li> </ul> |
So we can see that the un-ordered list can have different bullet styles defined in the <ul type="square"> tag. If no type is defined <ul>, the default will be used which is disc.
Please note the correct code structure.
We can also apply the bullet type to individual list items. Look at the example below.
| Output | html code |
|
<ul> <li type="circle">item 1</li> <li type="disc">item 2</li> <li type="square">item 3</li> </ul> |
All we done was add the type="" to the <li> tag - <li type="circle">
Finally we have one more attribute that we can use. Take a look at this example.
|
Notice that the bullets are now on the right hand side. this is done using the dir="" (direction) attribute. Here's the html code
|
<ul type="square" dir="rtl"> <li>item 1</li> <li>item 2</li> <li>item 3</li> </ul> |
The default value if none specified is the same as dir="ltr" - left to right. From that you can deduct that dir="rtl" is right to left :)
So, as far as un-ordered lists go that's about everything you need to know. Just remember to format your tags correctly.
Next we'll take a look at ordered list